|
|
|
|
Products
|
|
|
| | Product Code : 02
Specifications:
RVCP design of compartmentalized enclosures is for power distribution and motor control feeder panels. The combination of individual compartments, sizes and locations can be selected at the time of assembly.
Flexibility
- Highly flexible design layout is easily modifiable at any stage of manufacture.
- Layout modifications possible even after commissioning of the MCC/PCC.
- Internal mounting plates are depth adjustable.
Transport Costs
- Get in 2 dimensional flat pack un assembled condition.
- Save on transportation costs.
- Save on unloading costs.
Ease of Assembly
- Needs unskilled or at most semiskilled workforce.
- Needs simple pneumatic riveting tools.
Storage Space
- RVCP enclosure in CKD flat pack needs little space for storage.
- More space for manufacturing.
Large Range
- Non extensible panels for small limited use.
- Large extensible enclosures for large plants.
- Special enclosures for ACBs and power distribution.
- Many combinations possible.
PU Gasket
Polyurethane In Situ Foam Continuous type gasket.
Dip Prime Coat
All parts are dip prime coated before powder coating. Provides very long life. | |
|
| | Small control console for few controls at unit level for process operation. Design consists of a single body construction with out back access and only one sloping door for mounting control accessories. | |
|
| | Small control console for few controls at unit level for process operation. Design consists of a single body construction with back access. Desk part separately bolted main body comprising one sloping door for mounting control accessories and one vertical door for mounting indicating control | |
|
| | Small control console for few controls at unit level for process operation. Design consists of a three part body construction with back access. It consists of a Pedestal, control desk and top console. These parts are separately bolted together to form complete console. | |
|
| |
Product Code : 05
Specification:
Special Design Enclosures is an extensible design. This consists of extensible enclosure modules of widths 800 or 900mm. provision for mounting horizontal busbar chambers on top or bottom of the enclosure is provided. Horizontal busbar chambers come in standard size of 300mm height. A special busbar chambers of 400mm height for 600mm depth enclosures only is available to accommodate large dimension busbars (over 100mm).
| |
|
| |
Product Code : 08
Specification:
We offer a wide range of Stand Box that are crafted from the finest quality of wood. Our Stand Box can be customized according to the specifications and requirements of our customers. These Stand Box are available at attractive prices.
| |
|
| |
Product Code : 09
Specification:
Enclosure (Pulpit Design) are the new solution for the fast paced and ever changing requirements of the global industry. These modular structures are specifically designed and machined in order to ensure easy portability and installation. We fabricate these modular structures using a variety of plastics, concrete and steel in strict compliance with international quality standards.
| |
|
| | Product Code : 07
We supply specialized Special Design Enclosure that come in various sizes. These are designed inour own design center and created from special metal sheets.
Specification:
We supply specialized Special Design Enclosure that come in various sizes. These are designed inour own design center and created from special metal sheets.Small control console for few controls at unit level for process operation.These parts are separately bolted together to form complete console. | |
|
| |
Product Code : 12
Specification:
Walk through instrument panels in RV and RVE Designs
These models are for walk through type instrumentation and control enclosures. Central walkway width available is 800mm width. The total depth of the enclosure starts from 1600mm to maximum of 2400mm. Suitable for large instrument console panels. Suitable operator desks for operator controls can also be added to the front fix cover. Using RVE design one can make very large control room consoles.
Ventilation and Ingress protection of enclosures RV and RVE
RV enclosures meet IP 54 protection level. With suitable inlet and outlet provisions for air ventilation. We can provide enclosures meeting IP 20 to IP 44 protection level.
| |
|
| |
Product Code : 15
Specification:
Design WM is a standard design suitable for any application. This design is tested for IP class 66. The box is made of 2.0mm thick CRCA sheet steel and provided with PU in situ foam joint less gasket.
Design type WM is fully welded box design
- Tested for IP 66
- Internal door possible
- No gland plate
| |
|
| |
Product Code : 13
Specification:
This is an economical and innovative variation of single RV or RVE enclosure. This design starts from sizes 1400 width to 2400mm width in steps of 200mm. This is a single multi panel enclosure. It is possible to make any suitable combination of front doors of sizes 400mm width to 1200mm double door widths. One can fit individual mounting plates, filler trays etc, making it equivalent to joining of individual sections up to 2400 mm width.
| |
|
| |
Product Code : 14
Specification:
Floor standing riveted enclosures type RVE is fully riveted design. Riveted design provide the benefit of supply in flat pack. Saves on transport costs, assembly costs and storage space. RVE is fully extensible free standing enclosure which can be extended to any length by baying enclosures easily. RVE is fully riveted design. Riveted design provide the benefit of supply in flat pack. Saves on transport costs, assembly costs and storage space.
RVE is for extensible enclosures construction allowing easy baying of enclosures to any length. These meet IP 55 protection category for single door and IP 54 protection category for double door construction.
Specifications and material details RVE
RV Design has a main body made of consisting of side frames in 2.50 mm thick steel. Doors are of 2.00mm thick, back covers are in 1.50mm thick sheet steel. Main body, covers, doors are powder coated in RAL 7035 structure finish as standard. Special shade colours can be provided.
| |
|
| |
These models are for mounting computers in shop floor use. It protected a PC and Other computer hardware in an industrial and commercial environment. They are designed to prevent the ingress of environment contaminants such as dust and water. It is used to integrate a monitor, CPU, Keyboard with rails and Printer in one cabinet.
Can also provide you Printer drawer with rails, Which is designed in such a manner that it fitted the panel. | |
|
|
|
Mr. A. V. Bartakke, (Director) Sunil G. Kadam [ Asst. Manager Marketing ]
L-20, Additional.
M.I.D.C, Satara,Maharashtra, India
E-Mail: bepl@bartakke.co.in,amit@bartakke.co.in, sunilkadam@bartakke.co.in
Telephone: 91-2162-240431/240907
Mobile: +919822570899/+919689945778
Fax: 91-2162-240432
Website: http://www.bartakkeelectrofab.com/ |
|
|
|